柱前衍生-超高效液相色谱法测定3种奶粉中18种氨基酸

近年来羊奶粉和骆驼奶粉备受消费者青睐,它们具有潜在的低致敏性,因此成为牛乳不耐受人群尤其是婴幼儿的母乳替代品,其营养价值备受关注。牛奶粉、羊奶粉和骆驼奶粉中氨基酸含量的比较研究鲜有报道。利用酸水解得到游离氨基酸,选择6-氨基喹啉-N-羟基琥珀酰亚胺氨基甲酸酯(AQC)进行柱前衍生,超高效液相色谱分离并检测,外标法定量。18种氨基酸在各自线性范围内线性关系良好,相关系数(r ²)大于0.999;以3倍和10倍信噪比(S/N)确定方法的检出限(LOD)和定量限(LOQ),分别为1.3~2.5 (mg/100 g)和3.9~7.5 (mg/100 g)。方法验证采用奶粉标准参考物质SRM 1849a,测定值符合其含量范围,6次测定值的相对标准偏差(RSD)为2.04%~3.65%。采用建立的方法分别对市售和网购的牛奶粉、羊奶粉和骆驼奶粉进行18种氨基酸成分和含量分析,旨在从氨基酸角度对这3种不同来源乳品进行对比。该方法快速,灵敏度高,准确可靠,适用于不同基质乳粉中18种氨基酸成分和含量的确定。     

Carbon Nanotube Reinforced Titanium Metal Matrix Composites Prepared by Powder Metallurgy—A Review

Titanium-based metal composites (TMCs) are showing great potential to replace existing traditional materials in aerospace, automotive, and other high temperature engineering applications. This is due to their excellent mechanical, thermal, and physical properties and improved strength to weight ratio. Weight savings in the aerospace industry results in higher efficiency. Carbon nanotubes (CNTs), because of their low density and high Young's modulus, are considered to be an excellent reinforcement for metal matrix composites (MMCs). In the last 20 years extensive research has been carried out to investigate the combination of carbon nanotubes with aluminum, nickel, copper, magnesium, and other metal matrices. The production techniques such as mechanical alloying through powder metallurgy routes and their effects on the mechanical properties of CNT reinforced TMCs are reviewed in this article. The role of the volume fraction of carbon nanotubes and their dispersion into the metal matrix are highlighted. Governing equations to predict the mechanical and tribological properties of CNT reinforced titanium matrix composites are deduced. With the help of this initial prediction of properties, the optimal processing parameters can be optimized. Successful development of CNT reinforced TMCs would result in better wear and mechanical behavior and enhance their ability to withstand high temperature and structural loading environments.     

Electrochemical Biosensors Based on Enzymatic Reactor of Silver Solid Amalgam Powder for Measurements in Flow Systems

An enzymatic reactor based on silver solid amalgam powder was suggested as the main part of biosensors in flow systems for the first time. Biosensors were tested with following enzymes: ascorbate oxidase, glucose oxidase, catalase, tyrosinase and laccase. The current response of each biosensor was optimized with respect to the detection potential, flow rate, the injection and reactor volume. Relative standard deviation for detection with the studied enzymes was found to be in the range of 0.81–2.1 %. The biosensor with the ascorbate oxidase reactor was used for determination of ascorbic acid in the vitamin tablets Celaskon.     

C.I.颜料红177中间体的制备工艺改进

本文较为系统地研究了铜粉催化剂加入方式对C.I.颜料红177中间体4,4'-二氨基-1,1'-二蒽醌-3,3'-二磺酸(DAS)合成过程中的乌尔曼偶联反应速率的影响规律。 研究结果表明,在55 ℃较佳反应温度下,先加入与溴氨酸钠质量比为2:5的铜粉,反应一段时间后再加入与溴氨酸钠的质量比为1:5的铜粉,与一次性加入与溴氨酸钠的质量比为3:5的铜粉相比较,综合反应时间可节省2~3 h。 另外,对于DAS中混有的铜盐,采取在制备过程中加入柠檬酸的方法予以去除,此举可提高DAS的纯度。 当铜粉与柠檬酸的质量比为6:1时,可使DAS中铜盐的含量小于0.001%。 此外还探究了蒸馏后滤液的剩余量对DAS收率的影响,结果表明,滤液的剩余量在20 mL时,DAS的收率在95%以上。 基于本文的研究结果提出,欲进一步提高该反应的收率,需要寻找更高效的催化剂。     

氧化石墨烯/超细银粒子复合物的制备及其光电性能

超细银粉在太阳能电池正面电极领域有广阔的应用前景,其粒径分布、分散性、表面态与其性能息息相关。 本文通过在液相还原法合成超细银粉的后期引入氧化石墨烯(GO),利用溶液状态下二者相对活性的表面的相互作用获得了性能优良的银粉。 通过X射线衍射(XRD)、拉曼光谱(Raman)和扫描电子显微镜(SEM)等手段对所得复合超细银粉进行结构及形貌表征,结果显示该法获得的银粉分散性较好、尺寸分布较窄。 进而,利用紫外-可见光谱探讨了GO与银粒子之间的相互作用。 而且研究发现:固定硝酸银溶液的浓度,随着GO含量的增加,银粉的导电性能先升高后降低,当GO的质量分数为2.5%时,导电性能更好。 这为超细银粉在实际中的应用提供重要数据和有益参考。     

用于荧光光谱测定的微量固体粉末样品制样优化*

为满足微量固体粉末荧光检测要求,采用薄层制样法,改变黏结剂种类、黏结剂的用量、涂层厚度以及后处理方法来进行其制样工艺优化。 结果表明:以聚乙烯醇做黏结剂、1∶5的固液比、在50 ℃烘干30 min、涂片次数3层的薄层制样优化工艺可满足荧光固体测样的要求。采用t检验比较固体样品池装样和薄层制样法的荧光检测结果发现两者无显著性差异,薄层制样优化工艺的需样量较样品池减少90%。     

Multiobjective Optimization of Fabrication Parameters of Jute Fiber/Polyester Composites with Egg Shell Powder and Nanoclay Filler

In the present study, a model is presented to optimize the fabrication parameters of natural fiber reinforced polyester matrix composites with dual fillers. In particular, jute fiber mat was chosen as reinforcement and eggshell powder (ESP) and montmorillonite nanoclay (NC) were selected as fillers. The weight per square meter (GSM) of the fiber, the weight percentage of ESP and NC have been chosen as independent variables and the influence of these variables on tensile, flexural and impact strength of the composite has been inspected. The permutations of the different combinations of factors are intended to accomplish higher interfacial strength with the lowest possible number of tested specimens. The experiments were designed by the Taguchi strategy and a novel multi-objective optimization technique named COPRAS (COmplex PRoportional ASsessment of alternatives) was used to determine the optimal parameter combinations. Affirmation tests were performed with the optimal parameter settings and the mechanical properties were evaluated and compared. Experimental results show that fiber GSM and eggshell powder content are significant variables that improve mechanical strength, while the nanoclay appears less important.     

Influence of magnetic powders on the tribological performance of a novel magnetic brake material

By adding magnetic powders into matrix material, it has been proved to be a creative approach to improve tribological properties of brake materials. In this paper, a novel magnetic brake material with Nd–Fe–B and nano-Fe₃O₄ was developed, and the influential mechanism of these two magnetic powders and their content on the friction and wear performance was deeply discussed. Firstly, some experiments were carried out to investigate the tribological performance and influential mechanisms of four groups of brake pad samples with different magnetic powders. Furthermore, based on these results, further experiments for investigating the influence that Nd–Fe–B contents have on the tribological properties were conducted. According to the theoretical analysis about experiments, it was concluded that nano-Fe₃O₄ is beneficial to promote the formation of friction film and has certain lubricant effects. However, Nd–Fe–B has double effects on the formation of friction film. It will have positive effects when its content is less than a certain value. Otherwise, it will destroy the structure of friction film. Conclusively, it is believed that this study will be significantly valuable and meaningful for developing new brake materials and improving safety reliability of mechanical brakes.     

Nanocomposite Mullite/Mullite Powders by Spray Pyrolysis

A mullite/mullite nanocomposite powder has been synthesized, composed of nanometer-size 3Al₂O₃·2SiO₂ (3/2) mullite precipitates within a matrix of the high alumina 2Al₂O₃·SiO₂ (2:1) mullite. Historically, the transition from the metastable high-alumina phase to the thermodynamically stable 3:2 phase of mullite has been thought to be a continuous process, involving a continuous solid solution between the two forms of mullite. In contradiction to this widely held view, our high resolution transmission electron microscopic characterization confirms that a first order phase transition between two distinct mullites occurs. The high degree of interface coherence between the precipitates and the matrix allows us to speculate that the mechanical properties of the matrix could be enhanced by a process similar to the precipitation hardening of metals.